Search NASA⌕ Search

Engineering topics

Ewing, Jacob J.

Publications and source records attributed to Ewing, Jacob J..

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗

Pure edge-dislocation half-loops in low-temperature Ga⁢N for V-defect formation

Lateral injection of carriers through semipolar crystallographic planes into c-plane QWs is one of the new frontiers in III-N light-emitting diodes (LEDs), especially for long wavelengths. Strategic use of V-defects has proven to be the most promising method for lateral injection, and creating optimal V-defect structure and density is an important research area for reducing forward voltage and increasing wall plug efficiency. Here, in this article, we present a novel method for forming V-defects in nominally unstressed low-temperature Ga⁢N through the generation of pure edge-dislocation half-loops. We present a detailed material science analysis of the loops via scattering-contrast electron microscopy. The loops have pure-edge character with Burgers vector 1/3 ⁢⟨$11\bar{2}0$⟩, and form in a sessile orientation on {$11\bar{2}0$} a-planes. The two arms of the loops are inclined such that the extra half-planes face down toward the growth substrate. The dislocation loops can be used to intentionally form V-defects through conditions of kinetically limited growth: these conditions also favor nucleation of V-defects at ∼100% of other threading dislocations in the Ga⁢N templates. Patterned sapphire substrates (PSS) are one of the most important substrates for III-N LED growth because of their superior light extraction. However, due to its low threading dislocation density, PSS have not been used extensively for V-defect LEDs. This work provides a pathway for improved control of V-defect formation and density on LEDs grown on sapphire with the goal of enabling uniform lateral injection in these V-defect engineered LEDs with low forward voltage, including PSS for high light extraction.

LEDs↗

Planarization of p -GaN surfaces on MOCVD grown V-defect engineered GaN-based LEDs

The large polarization barriers between the quantum wells and quantum barriers in long-wavelength GaN-based light-emitting diodes (LEDs) inhibit their performance by requiring excess driving voltages to reach standard operating current densities. Lateral injection of carriers directly into quantum wells is required to circumvent this issue. V-defects are naturally occurring inverted hexagonal defects with semipolar {$10\bar{1}1$}-plane sidewalls generated on surface depressions from threading dislocations. LEDs engineered to intentionally generate V-defects below the active region of the LED can achieve lateral carrier injection through the V-defect sidewalls and have already been able to demonstrate world record wall-plug efficiencies for LEDs in the green-red wavelengths. V-defects can be enlarged during kinetically limited growth where the growth rate of the c-plane GaN is faster than that of their sidewalls, leaving them unfilled. We report on the metal organic chemical vapor deposition growth conditions required to fill in V-defects with p-GaN during epitaxial growth of the LED post the active region. Circular transmission length measurements of Pd/Au contacts processed on p-GaN surfaces with various amounts of unfilled V-defects showed no significant difference in their sheet resistance and specific contact resistance. J–V measurements of LEDs grown with varying unfilled V-defect densities showed no significant difference in the forward bias regime. However, in the reverse bias regime, catastrophic breakdown occurred at markedly lower voltages for samples with larger unfilled V-defect densities. This suggests that unfilled V-defects may act as hotspots for device failure, and planarizing LED surfaces may help prevent early degradation of LED devices.

Chemical vapor deposition↗

High external quantum efficiency (6.5%) InGaN V-defect LEDs at 600 nm on patterned sapphire substrates

Highly efficient long-wavelength InGaN LEDs have been a research focus in nitride LEDs for their potential applications in displays and solid-state lighting. A key breakthrough has been the use of laterally injected quantum wells via naturally occurring V-defects which promote hole injection through semipolar sidewalls and help to overcome the barriers to carrier injection that plague long wavelength nitride LEDs. In this article, we study V-defect engineered LEDs on (0001) patterned sapphire substrates (PSS) and GaN on (111) Si. V-defects were formed using a 40-period InGaN/GaN superlattice and we report a packaged external quantum efficiency (EQE) of 6.5% for standard 0.1 mm 2 . LEDs on PSS at 600 nm. We attribute the high EQE in these LEDs to lateral injection via V-defects.

Ewing, Jacob J.↗

Improved wall-plug efficiency of III-nitride tunnel junction micro-light-emitting diodes with AlGaN/GaN polarization charges

The electrical performances of III-nitride blue micro-light-emitting diodes (µLEDs) with different tunnel junction (TJ) epitaxial architectures grown by metalorganic chemical vapor deposition are investigated. A new TJ structure that employs AlGaN is introduced. The current density–voltage characteristic is improved by incorporating AlGaN layer above the n-side of the TJ layer, and the effects of the AlGaN/GaN superlattices is examined. Based upon the data from band diagram simulation, net positive polarization charge is formed at the AlGaN/GaN interface, which results in a reduction in tunneling distance and increase in tunneling probability. Moreover, similar electrical improvement is observed in various device dimensions and is independent of operating current density, suggesting that AlGaN/GaN biaxial tensile strain or current spreading is not the main contribution for the improvement. Finally, the effects on the efficiency performances are determined. While the maximum external quantum efficiency of the TJ devices remains identical, the wall-plug efficiency of µLEDs is enhanced significantly by the proposed AlGaN-enhanced TJ design. This work reveals the possibility of energy efficient TJ contact with high transparency in the visible wavelength range.

36 MATERIALS SCIENCE↗