Search NASA⌕ Search

Engineering topics

Htoon, Han

Publications and source records attributed to Htoon, Han.

At least 37 records · Page 2

Expanding the Energy Range from eV to MeV and Fabrication of Sources Enabling Novel Focused Ion Beam Nanofabrication and Modification

Multi-species focused ion beam (FIB) has the capability of running a variety of ion species allowing tailoring of the ion to the application enabling new applications of FIB such as localized doping and the creation of single defect centers. Also, through variation of the ion energy from eV to MeV, specific depths within the sample can be targeted enabling targeting of deeply buried layers inaccessible by traditional FIB systems. The combination of these capabilities opens up new areas of study including quantum information science and 2D materials.

47 OTHER INSTRUMENTATION↗

Electroluminescence from Single-Walled Carbon Nanotubes with Quantum Defects

Individual single-walled carbon nanotubes with covalent sidewall defects have emerged as a class of photon sources whose photoluminescence spectra can be tailored by the carbon nanotube chirality and the attached functional group/molecule. Here we present electroluminescence spectroscopy data from single-tube devices based on (7, 5) carbon nanotubes, functionalized with dichlorobenzene molecules, and wired to graphene electrodes. We observe electrically generated, defect-induced emissions that are controllable by electrostatic gating and strongly red-shifted compared to emissions from pristine nanotubes. The defect-induced emissions are assigned to excitonic and trionic recombination processes by correlating electroluminescence excitation maps with electrical transport and photoluminescence data. At cryogenic conditions, additional gate-dependent emission lines appear, which are assigned to phonon-assisted hot-exciton electroluminescence from quasi-levels. Similar results were obtained with functionalized (6, 5) nanotubes. We also compare functionalized (7, 5) electroluminescence data with photoluminescence of pristine and functionalized (7, 5) nanotubes redox-doped using gold(III) chloride solution. This work shows that electroluminescence excitation is selective toward neutral defect-state configurations with the lowest transition energy, which in combination with gate-control over neutral versus charged defect-state emission leads to high spectral purity.

36 MATERIALS SCIENCE↗

Strong Purcell enhancement at telecom wavelengths afforded by spinel Fe 3 O 4 nanocrystals with size-tunable plasmonic properties

Developments in the field of nanoplasmonics have the potential to advance applications from information processing and telecommunications to light-based sensing. Traditionally, nanoscale noble metals such as gold and silver have been used to achieve the targeted enhancements in light-matter interactions that result from the presence of localized surface plasmons (LSPs). However, interest has recently shifted to intrinsically doped semiconductor nanocrystals (NCs) for their ability to display LSP resonances (LSPRs) over a much broader spectral range, including the infrared (IR). Among semiconducting plasmonic NCs, spinel metal oxides (sp-MOs) are an emerging class of materials with distinct advantages in accessing the telecommunications bands in the IR and affording useful environmental stability. In this work, we report the plasmonic properties of Fe 3 O 4 sp-MO NCs, known previously only for their magnetic functionality, and demonstrate their ability to modify the light-emission properties of telecom-emitting quantum dots (QDs). We establish the synthetic conditions for tuning sp-MO NC size, composition and doping characteristics, resulting in unprecedented tunability of electronic behavior and plasmonic response over 450 nm. In particular, with diameter-dependent variations in free-electron concentration across the Fe 3 O 4 NC series, we introduce a strong NC size dependency onto the optical response. In addition, our observation of plasmonics-enhanced decay rates from telecom-emitting QDs reveals Purcell enhancement factors for simple plasmonic-spacer-emitter sandwich structures up to 51-fold, which are comparable to values achieved previously only for emitters in the visible range coupled with conventional noble metal NCs.

36 MATERIALS SCIENCE↗

Epitaxial Thin Films of a Chalcogenide Perovskite

Chalcogenide perovskites have emerged as a new class of optoelectronic materials, especially for photovoltaic applications, but fundamental properties and applications of chalcogenide perovskites remain limited due to the lack of high-quality thin films. In this paper, we report direct epitaxial thin film growth of BaZrS 3 , a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out-of-plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though away from the interface, the films are polycrystalline with many extended defects, suggesting the potential for further improvement in growth. X-ray reflectivity and atomic force microscopy show smooth film surfaces and interfaces between the substrate and the film. The films show strong light absorption near the band edge and photoluminescence in the visible region, validating BaZrS 3 as a suitable candidate for ultrathin front absorbers in tandem solar cells. The photodetector devices show fast and efficient photo response with the highest ON/OFF ratio reported for BaZrS 3 films thus far. Our study opens up opportunities to use high quality thin films of chalcogenide perovskites to probe fundamental physical phenomena in thin films and heterostructures and also in photovoltaic and optoelectronic applications.

36 MATERIALS SCIENCE↗

Quantum Light Emission from Coupled Defect States in DNA-Functionalized Carbon Nanotubes

Solid-state single-photon sources are essential building blocks for quantum photonics and quantum information technologies. This study demonstrates promising single-photon emission from quantum defects generated in single-wall carbon nanotubes (SWCNTs) by covalent reaction with guanine nucleotides in their single-stranded DNA coatings. Low-temperature photoluminescence spectroscopy and photon-correlation measurements on individual guanine-functionalized SWCNTs (GF-SWCNTs) indicate that multiple, closely spaced guanine defect sites within a single ssDNA strand collectively form an exciton trapping potential that supports a localized quantum state capable of room-temperature single-photon emission. In addition, exciton traps from adjacent ssDNA strands are weakly coupled to give cross-correlations between their separate photon emissions. Theoretical modeling identifies coupling mechanism as a capture of band-edge excitons. Finally, because the spatial pattern of nanotube functionalization sites can be readily controlled by selecting ssDNA base sequences, GF-SWCNTs should become a versatile family of quantum light emitters with engineered properties.

36 MATERIALS SCIENCE↗

Interplay of Bright Triplet and Dark Excitons Revealed by Magneto‐Photoluminescence of Individual PbS/CdS Quantum Dots

Abstract A low‐temperature polarization‐resolved magneto‐photoluminescence experiment is performed on individual PbS/CdS core/shell quantum dots (QDs). The experiment enables a direct measurement of the exciton Landé g factor and the anisotropic zero‐field splitting of the lowest emissive bright exciton triplet in PbS/CdS QDs. While anisotropic splittings of individual QDs distribute randomly in 104—325 μeV range, the exciton Landé g factors increase from 0.95 to 2.70 as the emission energy of the QD increases from 1.0 to 1.2 eV. The tight‐binding calculations allow to rationalize these trends as a direct consequence of reducing a cubic symmetry of QD via addition/removal of a few (<70) atoms from the surfaces of the PbS core. Furthermore, it is observed that while right ( σ + ) and left ( σ − ) circularly polarized photoluminescence (PL) peaks split linearly with magnetic field as expected for Zeeman effect, the energy splitting between X and Y linearly polarized PL peaks remains nearly unchanged. The theoretical study reveals rich and complex magnetic field‐induced interplay of bright triplet and dark exciton states explaining this puzzling behavior. These findings fill the missing gaps in the understanding of lead salt QDs and provide foundation for development of classical and quantum light sources operating at telecommunication wavelengths.

Kim, Younghee↗

Single photon sources with near unity collection efficiencies by deterministic placement of quantum dots in nanoantennas

Deterministic coupling between photonic nodes in a quantum network is an essential step toward implementing various quantum technologies. The omnidirectionality of free-standing emitters, however, makes this coupling highly inefficient, in particular if the distant nodes are coupled via low numerical aperture (NA) channels such as optical fibers. This limitation requires placing quantum emitters in nanoantennas that can direct the photons into the channels with very high efficiency. Moreover, to be able to scale such technologies to a large number of channels, the placing of the emitters should be deterministic. In this work, we present a method for directly locating single free-standing quantum emitters with high spatial accuracy at the center of highly directional bullseye metal–dielectric nanoantennas. We further employ non-blinking, high quantum yield colloidal quantum dots for on-demand single-photon emission that is uncompromised by instabilities or non-radiative exciton recombination processes. Taken together, this approach results in a record-high collection efficiency of 85% of the single photons into a low NA of 0.5, setting the stage for efficient coupling between on-chip, room temperature nanoantenna-emitter devices and a fiber or a remote free-space node without the need for additional optics.

36 MATERIALS SCIENCE↗

Photoluminescence Dynamics Defined by Exciton Trapping Potential of Coupled Defect States in DNA-Functionalized Carbon Nanotubes

Chemical reactions between semiconducting single-wall carbon nanotubes (SWCNTs) and single-stranded DNA (ssDNA) achieve spatially patterned covalent functionalization sites and create coupled fluorescent quantum defects on the nanotube surface, tailoring SWCNT photophysics for applications such as single-photon emitters in quantum information technologies. The evaluation of relaxation dynamics of photoluminescence (PL) from those coupled quantum defects is essential for understanding the nanotube electronic structure and beneficial to the design of quantum light emitters. Here, we measured the PL decay for ssDNA-functionalized SWCNTs as a function of the guanine content of the ssDNA oligo that dictates the red-shifting of their PL emission peaks relative to the band-edge exciton. We then correlate the observed dependence of PL decay dynamics on energy red-shifts to the exciton potential energy landscape, which is modeled using first-principles approaches based upon the morphology of ssDNA-altered SWCNTs obtained by atomic force microscopy (AFM) imaging. In this work, our simulations illustrate that the multiple guanine defects introduced within a single ssDNA strand strongly interact to create a deep exciton trapping well, acting as a single hybrid trap. The emission decay from the distinctive trapping potential landscape is found to be biexponential for ssDNA-modified SWCNTs. We attributed the fast time component of the biexponential PL decay to the redistribution of exciton population among the lowest energy bright states and a manifold of dark states emerging from the coupling of multiple guanine defects. The long lifetime component in the biexponential decay, on the other hand, is attributed to the redistribution of exciton population among different exciton trapping sites that arise from the binding of multiple ssDNA strands along the nanotube axis. AFM measurements indicate that those trapping sites are separated on average by ~8 nm along the nanotube axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PbS/CdS Quantum Dot Room-Temperature Single-Emitter Spectroscopy Reaches the Telecom O and S Bands via an Engineered Stability

We synthesized PbS/CdS core/shell quantum dots (QDs) to have functional single-emitter properties for room-temperature, solid-state operation in the telecom O and S bands. Two shell-growth methods–cation exchange and successive ionic layer adsorption and reaction (SILAR)–were employed to prepare QD heterostructures with shells of 2–16 monolayers. PbS/CdS QDs were sufficiently bright and stable to resolve photoluminescence (PL) spectra representing both bands from single nanocrystals using standard detection methods, and for a QD emitting in the O-band a second-order correlation function showed strong photon antibunching, important steps toward demonstrating the utility of lead chalcogenide QDs as single-photon emitters (SPEs). Irrespective of type, few telecom-SPEs exist that are capable of such room-temperature operation. Access to single-QD spectra enabled a direct assessment of spectral line width, which was ~70–90 meV compared to much broader ensemble spectra (~300 meV). We show inhomogeneous broadening results from dispersity in PbS core sizes that increases dramatically with extended cation exchange. Quantum yields (QYs) are negatively impacted at thick shells (>6 monolayers) and, especially, by SILAR-growth conditions. Time-resolved PL measurements revealed that, with SILAR, initially single-exponential PL-decays transition to biexponential, with opening of nonradiative carrier-recombination channels. Radiative decay times are, overall, longer for core/shell QDs compared to PbS cores, which we demonstrate can be partially attributed to some core/shell sizes occupying a quasi-type II electron–hole localization regime. Finally, we demonstrate that shell engineering and the use of lower laser-excitation powers can afford significantly suppressed blinking and photobleaching. However, dependence on shell thickness comes at a cost of less-than-optimal brightness, with implications for both materials and experimental design

36 MATERIALS SCIENCE↗

Structural and Optical Properties of Phase-Pure UO 2 , α-U 3 O 8 , and α-UO 3 Epitaxial Thin Films Grown by Pulsed Laser Deposition

Fundamental understanding of the electronic, chemical, and structural properties of uranium oxides requires the synthesis of high-crystalline-quality epitaxial films of different polymorphs of one material or different phases with various oxygen valence states. Here we report the growth of single-phase epitaxial UO 2 , α-U 3 O 8 , and α-UO 3 thin films using pulsed laser deposition. Both oxygen partial pressure and substrate temperature play critical roles in determining the crystal structure of the uranium oxide films. X-ray diffraction and Raman spectroscopy demonstrate that the films are single phase with excellent crystallinity and epitaxially grown on a variety of substrates. Chemical valance states and optical properties of epitaxial uranium oxide films are studied by X-ray photoelectron spectroscopy and UV–vis spectroscopy, which further confirm the high-quality stoichiometric phase-pure uranium oxide thin films. Epitaxial UO2 films show a direct band gap of 2.61 eV, while epitaxial α-UO 2 , α-U 3 O 8 and α-UO 3 films exhibit indirect band gaps of 1.89 and 2.26 eV, respectively. The ability to grow high-quality epitaxy actinide oxide thin films and to access their different phases and polymorphous will have significant benefits to the future applications in nuclear science and technology.

36 MATERIALS SCIENCE↗

Role of shell composition and morphology in achieving single-emitter photostability for green-emitting “giant” quantum dots

The use of the varied chemical reactivity of precursors to drive the production of a desired nanocrystal architecture has become a common method to grow thick-shell graded alloy quantum dots (QDs) with robust optical properties. Conclusions on their behavior assume the ideal chemical gradation and uniform particle composition. In this work, advanced analytical electron microscopy (high-resolution scanning transmission electron microscopy coupled with energy dispersive spectroscopy) is used to confirm the nature and extent of compositional gradation and these data are compared with performance behavior obtained from single-nanocrystal spectroscopy to elucidate structure, chemical-composition, and optical-property correlations. In particular, the evolution of the chemical structure and single-nanocrystal luminescence was determined for a time-series of graded-alloy “CdZnSSe/ZnS” core/shell QDs prepared in a single-pot reaction. In a separate step, thick (~6 monolayers) to giant (>14 monolayers) shells of ZnS were added to the alloyed QDs via a successive ionic layer adsorption and reaction (SILAR) process, and the impact of this shell on the optical performance was also assessed. By determining the degree of alloying for each component element on a per-particle basis, we observe that the actual product from the single-pot reaction is less “graded” in Cd and more so in Se than anticipated, with Se extending throughout the structure. The latter suggests much slower Se reaction kinetics than expected or an ability of Se to diffuse away from the initially nucleated core. It was also found that the subsequent growth of thick phase-pure ZnS shells by the SILAR method was required to significantly reduce blinking and photobleaching. However, correlated single-nanocrystal optical characterization and electron microscopy further revealed that these beneficial properties are only achieved if the thick ZnS shell is complete and without large lattice discontinuities. Thus, we identify the necessary structural design features that are required for ideal light emission properties in these green-visible emitting QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic Exciton Photophysics of PbS Quantum Dots Revealed by Low-Temperature Single Nanocrystal Spectroscopy

With a tunable size-dependent photoluminescence (PL) over a wide infrared wavelength range, lead chalcogenide quantum dots (QDs) have attracted significant scientific and technological interest. Nevertheless, the investigation of intrinsic exciton photophysics at the single-QD level has remained a challenge. Herein, we present a comprehensive study of PL properties for the individual core/shell PbS/CdS QDs emissive near 1.0 eV. In contrast to the sub-meV spectral line widths observed for II/VI QDs, PbS/CdS QDs are predicted to possess broad homogeneous line widths. Performing spectroscopy at cryogenic (4 K) temperatures, we provide direct evidence confirming theoretical predictions, showing that intrinsic line widths for PbS/CdS QDs are in the range of 8–25 meV, with an average of 16.4 meV. In addition, low-temperature, single-QD spectroscopy reveals a broad low-energy side emission attributable to optical as well as localized acoustic phonon-assisted transitions. By tracking single QDs from 4 to 250 K, we were able to probe temperature-dependent evolutions of emission energy, line width, and line shape. Lastly, polarization-resolved PL imaging showed that PbS/CdS QDs are characterized by a 3D emission dipole, in contrast with the 2D dipole observed for CdSe QDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗