Search NASA⌕ Search

Engineering topics

Mane, Anil U.

Publications and source records attributed to Mane, Anil U..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Structural Changes during the Conversion Reaction of Tungsten Oxide Electrodes with Tailored, Mesoscale Porosity

In-plane tungsten oxide nanostructures, including hexagonally patterned cylinders and holes in a matrix, were fabricated via sequential infiltration synthesis (SIS) on self-assembled block copolymer templates. Using the tailored morphology and porosity of these model electrodes with in situ grazing incidence small angle X-ray scattering, the intrinsic structural change of nanoscale active materials during the conversion reaction of WO 3 + 6Li ↔ W + 3 Li 2 O was investigated at controlled electrochemical conditions. Reversible electrode volume expansion and contraction was observed during lithiation and delithiation cycles, respectively. The potential where electrode’s thickness expansion started was ~1.6 V, which is close to thermodynamically expected one for conversion reaction of WO 3 with lithium (1.65 V). The temporal evolution of the electrode volume at constant electrode potentials revealed high overpotential for bulk lithiation and slow conversion reaction kinetics, despite the tailored porosity of the SIS electrodes. Oxide cylinders showed smaller overall electrode thickness change, likely due to unconstrained lateral volume change, as compared to a matrix with holes. On the other hand, better connectivity and guided volume change of the latter electrode morphology provided improved cycling stability. Additionally, heterogeneity in an electrode, from internal pores and density gradients, was found to aggravate the fragmentation of the electrode during conversion reaction. Insights into oxide conversion reaction kinetics and the relationship between electrode mesostructure and cycling behavior obtained from this study can help guide the more rational design of conversion electrode for high performing batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular layer etching

A method of etching an organic or hybrid inorganic/organic material. The method etches molecular layer deposition coatings. An etching cycle comprises a first half reaction exposing the coating to a precursor. A second half reaction exposes a second precursor, removing or etching a portion of the coating.

Young, Matthias John↗
DOE OSTI2021

Composite bilayer coatings for high capacity cathodes and anodes

An electrode comprises an electrode core. A composite bilayer coating is conformally disposed on the electrode core. The composite bilayer coating comprises a first layer disposed on at least a portion of the electrode core. The first layer comprises a metal fluoride, a metal oxide or a metal sulfide. A second layer is disposed on the first layer and comprises a metal fluoride, a metal oxide or a metal sulfide.

Mane, Anil U.↗
DOE OSTI2021

Elucidating the Redox Behavior during Atomic Layer Deposition on Lithium-Ion Battery Cathode Materials

Atomic layer deposition (ALD) has emerged as a promising technology for applying ultrathin protective coatings on lithium-ion battery (LIB) cathode surfaces to improve their cycling stability. While there have been numerous reports evaluating the electrochemical performance of these surface-modified cathode materials, the chemical changes induced on the surface of the cathode materials upon ALD coating are not fully studied. This paper describes a systematic investigation to understand the interfacial changes of 12 different cathode materials upon coating with aluminum oxide (Al 2 O 3 ) using trimethyl aluminum (TMA) and H 2 O, and aluminum fluoride (AlF 3 ) using TMA and hydrogen fluoride pyridine (HFPy). Here, the surface composition of these cathode materials, which range from simple transition metal oxides (e.g. NiO and MnO) to complex multi-element cathode materials (e.g. LiNi x Mn 1-x-y Co y O 2 , NMC), was studied via X-ray photoelectron spectroscopy (XPS). The XPS measurements reveal that the transition metals in the cathode materials undergo selective oxidation/reduction depending upon the nature of the precursor, the coating, and the cathode material. The ability to chemically modify the surface of cathode materials via vapor-phase precursor adsorption will open new avenues to systematically control the interface of the cathode materials in LIBs that are not possible by conventional coating methods.

25 ENERGY STORAGE↗
DOE OSTI2021

Surface Zeta Potential of ALD-Grown Metal-Oxide Films

Membranes are among the most promising technologies for energy-efficient and highly selective separations, and the surface-charge property of membranes plays a critical role in their broad applications. Atomic layer deposition (ALD) can deposit materials uniformly and with high precision and controllability on arbitrarily complex and large substrates, which renders it a promising method to tune the electrostatics of water/solid interfaces. However, a systematic study of surface-charge properties of ALD-grown films in aqueous environments is still lacking. In this work, 17 ALD-grown metal-oxide films are synthesized, and a comprehensive study of their water stability, wetting properties, and surface-charge properties is provided. Furthermore, this work represents a resource guide for researchers and ultimately for materials and process engineers, seeking to tailor interfacial charge properties of membranes and other porous water treatment components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metal fluoride passivation coatings prepared by atomic layer deposition for Li-ion batteries

The fabrication of robust interfaces between transition metal oxides and non-aqueous electrolytes is one of the great challenges of lithium ion batteries. Atomic layer deposition (ALD) of aluminum tungsten fluoride (AlWxFy) improves the electrochemical stability of LiCoO2. AlWxFy thin films were deposited by combining trimethylaluminum and tungsten hexafluoride. in-situ quartz crystal microbalance and transmission electron microscopy studies show that the films grow in a layer-by-layer fashion and are amorphous nature. Ultrathin AlWxFy coatings (<10 Å) on LiCoO2 significantly enhance stability relative to bare LiCoO2 when cycled to 4.4 V. The coated LiCoO2 exhibited superior rate capability (up to 400 mA/g) and discharge capacities at a current of 400 mA/g were 51% and 92% of the first cycle capacities for the bare and AlWxFy coated materials. These results open new possibilities for designing ultrathin and electrochemically robust coatings of metal fluorides via ALD to enhance the stability of Li-ion electrodes.

Mane, Anil U.↗
DOE OSTI2021

Atomic layer deposition of fluoride thin films

A secondary electron emissive coating. The coating is formed by atomic layer deposition of CaF 2 on a substrate by ALD half cycle exposure of an alkaline metal amidinate and ALD half cycle exposure of a fluorinated compound, where the deposition occurs at a reaction temperature greater than a highest sublimation temperature of the first metal precursor and the second metal precursor and less than 50° C. above the highest sublimation temperature.

Elam, Jeffrey W.↗
DOE OSTI2021

Boron-10 containing biocompatible nanostructures

A method comprises providing a plurality of nanostructures comprising a base material. The plurality of nanostructures are exposed to a first material at a first deposition temperature. The plurality of nanoparticles are exposed to a second material at a second deposition temperature, and exposed to a Boron-10 (10B) containing material at a third deposition temperature so as to form a 10B-metal oxide based composite nanostructure.

Mane, Anil U.↗
DOE OSTI2021

Advanced strategies for the development of porous carbon as a Li host/current collector for lithium metal batteries

Lithium metal is considered a promising anode material for high-energy-density rechargeable batteries because of its high specific theoretical capacity (3860 mAh g -1 , low mass density (0.534 g cm -3 ), and low electrochemical redox potential (-3.04 V vs. the standard hydrogen electrode). However, the high reactivity of Li with the electrolyte leads to the formation of an unstable solid electrolyte interphase (SEI) and continuous side reactions. Also, the non-uniform lithium-ion flux and infinite volume expansion of Li metal cause the growth of Li dendrites. These pose significant safety challenges and cause rapid capacity fading of the lithium metal batteries (LiMBs). To resolve these issues, a low-cost, easily processed, lightweight, high-performance carbon-based porous matrix is considered promising to host Li metal deposition. The three-dimensional (3D) porous nano/microstructured carbon provides sufficient space for Li accommodation during Li plating, buffers the volume changes during Li plating/stripping, and lowers the effective current density contributing to dendrite-free Li deposition. Besides, the outstanding electrochemical and mechanical stability, flexibility and the high electronic conductivity enable the nano/microstructured carbon to serve as both Li host and current collector. The development of 3D carbon/Li composite by mechanical roll-press techniques not only eliminates the complex and risky procedure of making carbon/Li composite based on Li plating or molten Li infusion but also stabilizes the capacity at higher Li plating/stripping rates. Recently, there is an advancement in the lithiophilic decorations of 3D structure to introduce sufficient nucleation sites and the development of artificial SEI on top of the 3D matrix to suppress Li dendrite formation. Such 3D structural modifications create a uniform electric field, lower the Li nucleation overpotential, provide strong mechanical and chemical stability, and stabilize the interface thereby inhibiting the degradation of lithium and the electrolyte. Here we summarize the research progress on porous carbon/Li composites in terms of materials type, structure, fabrication technique, their electrochemical battery performance, and identify the critical challenges that need to be addressed for high-energy-density practical LiMBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Vapor-phase grafting of a model aminosilane compound to Al 2 O 3 , ZnO, and TiO 2 surfaces prepared by atomic layer deposition

Atomic layer deposition (ALD) is a highly versatile surface functionalization technique that can conformally coat both planar and porous substrates. Here we use ALD metal oxide layers to establish a well-defined starting surface for vapor-phase surface organic modification. Vapor-phase (3-aminopropyl)triethoxysilane (APTES) surface silanization of ALD Al 2 O 3 , ZnO and TiO 2 surfaces were studied at 100 °C, 150 °C and 200 °C. In situ quartz crystal microbalance (QCM) and Fourier-transform infrared (FTIR) spectroscopy measurements, and ex situ atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) measurements showed uniform monolayer silane formation through self-limiting APTES reaction. We observed a higher surface density of grafted APTES species following silanization at 100 °C compared to 200 °C, and we attribute this to the temperature-dependent reactivity of the surface hydroxyls and changes in the mode of APTES reaction. The FTIR and XPS measurements revealed that APTES reacts with Al 2 O 3 and ZnO exclusively through metal siloxy bond formation. However, APTES reacts with TiO 2 through both siloxy bond formation and ammonium salt formation via the amine group.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oleophilic foams for oil spill mitigation

A method of fabricating an oleophilic foam includes providing a foam comprising a base material. The base material is coated with an inorganic material using at least one of an atomic layer deposition (ALD), a molecular layer deposition (MLD) or sequential infiltration synthesis (SIS) process. The SIS process includes at least one cycle of exposing the foam to a first metal precursor for a first predetermined time and a first partial pressure. The first metal precursor infiltrates at least a portion of the base material and binds with the base material. The foam is exposed to a second co-reactant precursor for a second predetermined time and a second partial pressure. The second co-reactant precursor reacts with the first metal precursor, thereby forming the inorganic material on the base material. The inorganic material infiltrating at least the portion of the base material. The inorganic material is functionalized with an oleophilic material.

Darling, Seth B.↗
DOE OSTI2021

Atomic layer deposition of sodium fluoride thin films

The need for advanced energy conversion and storage devices remains a critical challenge amid the growing worldwide demand for renewable energy. Metal fluoride thin films are of great interest for applications in lithium-ion and emerging rechargeable battery technologies, particularly for enhancing the stability of the electrode-electrolyte interface and thereby extending battery cyclability and lifetime. Reported within, sodium fluoride (NaF) thin films were synthesized via atomic layer deposition. NaF growth experiments were carried out at reactor temperatures between 175 and 250 °C using sodium tert-butoxide and HF-pyridine solution. Here, the optimal deposition temperature range was 175–200 °C, and the resulting NaF films exhibited low roughness (R q ≈ 1.6 nm for films of ~8.5 nm), nearly stoichiometric composition (Na:F = 1:1.05) and a growth per cycle value of 0.85 Å/cycle on SiO 2 substrates. These results are encouraging for future applications of NaF thin films in the development of improved energy capture and storage technologies.

25 ENERGY STORAGE↗
DOE OSTI2020

Functionalized foams

A method of fabricating an foam includes providing a foam comprising a base material. The base material is coated with an inorganic material using at least one of an atomic layer deposition (ALD), a molecular layer deposition (MLD), or sequential infiltration synthesis (SIS) process. The SIS process includes at least one cycle of exposing the foam to a first metal precursor for a first predetermined time and a first partial pressure. The first metal precursor infiltrates at least a portion of the base material and binds with the base material. The foam is exposed to a second co-reactant precursor for a second predetermined time and a second partial pressure. The second co-reactant precursor reacts with the first metal precursor, thereby forming the inorganic material on the base material. The inorganic material infiltrating at least the portion of the base material. The inorganic material is functionalized with a material.

Darling, Seth B.↗
DOE OSTI2020

Enhanced electron amplifier structure and method of fabricating the enhanced electron amplifier structure

An enhanced electron amplifier structure includes a microporous substrate having a front surface and a rear surface, the microporous substrate including at least one channel extending substantially through the substrate between the front surface and the rear surface, an ion diffusion layer formed on a surface of the channel, the ion diffusion layer comprising a metal oxide, a resistive coating layer formed on the first ion diffusion layer, an emissive coating layer formed on the resistive coating layer, and an optional ion feedback layer formed on the front surface of the structure. The emissive coating produces a secondary electron emission responsive to an interaction with a particle received by the channel. The ion diffusion layer, the resistive coating layer, the emissive coating layer, and the ion feedback layer are independently deposited via chemical vapor deposition or atomic layer deposition.

Mane, Anil U.↗
DOE OSTI2020

Multifunctional Films Deposited by Atomic Layer Deposition for Tailored Interfaces of Electrochemical Systems

A new strategy for electrochemical interfaces that utilizes multilayer films deposited by atomic layer deposition (ALD) is introduced. Manganese-rich and nickel-rich cathode oxides were coated with a novel bilayer film of metal fluorides. Subsequent exposure to prolonged, high-voltage electrochemical cycling vs graphite electrodes revealed that the bilayer film can greatly enhance the high-voltage stability of cathode oxides. In particular, in manganese-rich cells, capacity fade due to manganese dissolution was substantially reduced and impedance rise was virtually eliminated. Furthermore, in nickel-rich NMC-811 cells, impedance rise was reduced by ~80%, compared to the NMC-811 baseline, after ~300 h of high-voltage exposure during cycling. Here, the multilayer film strategy presents an exciting opportunity for tailoring designs and materials for electrochemical interfaces in advanced lithium-ion batteries and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

3D printed micro channel plate, method of making and using 3D printed micro channel plate

The invention provides a gain device having a plurality of channels having a polygonal shape with four or more sides. The invention also provides a method for producing microchannel plates (MCPs) having the steps of providing a pre-polymer; and directing a laser over the pre-polymer into a pre-determined pattern. Also provided is method for efficiently 3D printing an object.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-capacity rotary drum for atomic layer deposition onto powders and small mechanical parts in a hot-walled viscous flow reactor

Atomic layer deposition (ALD) is uniquely capable of providing uniform thin-film coatings on powder substrates, but powder processing has historically required an ALD reactor designed specifically for powders-e.g., a fluidized bed. Tubular hot-walled viscous-flow reactors commonly employed in laboratory-scale ALD research for coating planar substrates such as silicon have been employed previously to coat gram quantities of powder spread out in a thin layer on a tray, but larger quantities of powder introduce long diffusion pathways where reactants are unable to percolate to the bottom of the powder bed to provide uniform coating in reasonable time periods. In this work, we report a rotary drum with a capacity of 100s of grams that is compatible with conventional tubular hot-walled ALD reactors and provides uniform coatings on powders in viscous flow operation. We benchmark this system using Al 2 O 3 ALD with trimethylaluminum and water. We examine the effect of rotation speed and powder quantity on saturation time via in situ quadrupole mass spectroscopy measurements and gravimetric analysis. Finally, the rotary drum we report is able to provide homogenous coating of up to 75g of silica gel powder with a total surface area of similar to 1500m 2 in viscous flow operation with precursor utilization as high as 70%.

47 OTHER INSTRUMENTATION↗