Search NASA⌕ Search

DOE OSTI · 959366

CsBr/GaN Heterojunction Photoelectron Source

Abstract

Experimental results on a new CsBr/GaN heterojunction photocathode structure are presented. The results indicate a fourfold improvement in photoyield relative to CsBr/Cr photocathodes. A model is presented based on intraband states in CsBr and electron injection from the GaN (with 1% addition of indium) substrate to explain the observed photoyield enhancement. The photocathode lifetime at high current density (>40 A/cm{sup 2}) is limited by laser heating of the small illuminated area. Calculations are presented for sapphire and diamond substrates, indicating a factor of 20 reduction in temperature for the latter. The results are encouraging for the realization of a high photoyield photocathode operating at high current density with long lifetime.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Maldonado, J R, Liu, Z, Sun, Y, Schuetter, S, Pianetta, P, Pease, R F.W.. 2009-04-30. CsBr/GaN Heterojunction Photoelectron Source. https://searchnasa.com/record/osti%3A959366/csbr-gan-heterojunction-photoelectron-source

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗