High Efficiency Evaporated CdSeTe/CdTe Solar Cells With and Without MgZnO Buffer Layer

Ablekim, Tursun; Duenow, Joel; Moutinho, Helio; Perkins, Craig; Moseley, John; Reese, Matthew; Metzger, Wyatt

doi:10.1109/pvsc45281.2020.9300795

Home/Archive/DOE OSTI

DOE OSTI · 1766852

High Efficiency Evaporated CdSeTe/CdTe Solar Cells With and Without MgZnO Buffer Layer

Ablekim, Tursun·Duenow, Joel·Moutinho, Helio·Perkins, Craig·Moseley, John·Reese, Matthew·Metzger, Wyatt

View original source ↗Export metadata ↓

Abstract

High efficiencies of ~19% CdTe solar cell devices were made using a thermal evaporation technique to deposit absorber layers of CdSe and CdTe. The absorber films were very high quality for a device fabrication, and with demonstrated high efficiency, it is a viable option to employ thermal evaporation in research and manufacturing. We also investigated four different interfaces scenarios of with and without MZO and CdSe in the device near front interface. The results clearly indicate that Se plays a key role in improving device performance, but the MZO is not necessarily required unless experiment goals demanded. Removing the MZO layer from the device structure and being able to use thermal evaporator for CdTe deposition will help with cost reduction in manufacturing.

Explore related subjects

41 EE - Solar Energy Technologies Office (EE-4S)CdTe solar cells

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Ablekim, Tursun, Duenow, Joel, Moutinho, Helio, Perkins, Craig, Moseley, John, Reese, Matthew, Metzger, Wyatt. 2021-01-05. High Efficiency Evaporated CdSeTe/CdTe Solar Cells With and Without MgZnO Buffer Layer. https://doi.org/10.1109/pvsc45281.2020.9300795

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2021

A Machine Learning Framework for Bridging the Gap Between the Steady-State Scheduling and Dynamic Security Operation for Future Power Grids

This presentation was part of an invited talk for a panel session presented at the 2021 IEEE Power & Energy Society General Meeting, held 26-29 July 2021.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2021

Assessment of Cloud Mask Forecasts from the WRF-Solar Ensemble Prediction System: Preprint

Numerical weather prediction (NWP) models are important tools used by government agencies and the renewable energy enterprise to forecast solar radiation. Cloud prediction, a key process of NWP models, has the highest impact on the accuracy of solar forecasting. This study uses satellite observations from the National Solar Radiation Data Base (NSRDB) to evaluate the cloud mask forecast by the WRF-Solar Ensemble Prediction System (WRF-Solar EPS). Preliminary analysis of the data in 2018 demonstrates the need of further improvement in predicting thin and low-level clouds. The information obtained from this work will be used to enhance the WRF-Solar EPS in reproducing the cloud field over the contiguous U.S. and reducing solar forecasting errors.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2021

Evaluating Cell Temperature Models and the Effect of Wind Speed in PV System Capacity Testing: Preprint

Capacity testing is a routine procedure for assessing a photovoltaic system's performance relative to expectations. The most common test method involves fitting a regression model that predicts system output power using operating weather conditions including wind speed. Structural modifications to the regression model to incorporate wind in different ways improved the model's ability to fit measured system performance, but the observed improvements were small and unlikely to change the result of a capacity test. However, the results showed that the choice of reporting wind speed and inclusion or exclusion of wind speed in the performance model used as the test benchmark can significantly change the test result.

41 EE - Solar Energy Technologies Office (EE-4S)↗